Adding A License To A Vision2 Server; Removing A License From A Vision2 Server; License Rules Engine; System Limits - AMX vision2 V8.4 Instruction Manual

NOTE: Live-Users indicates the number of users who are licensed to view Vision2 live channels using the Live Channels > View page.
System Licenses Table Columns
Type
Total
Allocated
Available

Adding a License to a Vision2 Server

To add a license to a server, click on the row for the license in the System License table and drag and drop the license onto the
Server (FIG. 40). Licenses are ordered by type on the server. Click the arrow to the left of the license name to view all the licenses of
this type.
Click arrow to expand
and view list of
licenses of this type
Service disabled
Service enabled
Adding a license to a server - drop the new license on to the Server
FIG. 40
The status of each service is indicated by a coloured circle:
Red indicates the service is disabled.

Green indicates it is enabled.

NOTE: Double click a service e.g. MPEG Recorder 1 to jump to the conf iguration page for that service.

Removing a License from a Vision2 Server

To remove a license from a server expand the arrow to the left of the service type (e.g. v2Record) to reveal all the licenses of that
type on the server. Select the license to remove and drag it to the trashcan. A service that is enabled cannot be removed. Double-
click the service to go to the configuration page and Disable it prior to removal.
NOTE: After removing one or more licenses from a server, reboot the server.
NOTE: If removing an Archive license, access to the contents of that Archive will be lost.

License Rules Engine

2
Vision operates a rules engine which limits the number of licenses of each type that can be had per server to avoid performance
problems.

System Limits

A maximum of 10 Record services can be had per Archive service in your Vision

Archives services you can have a maximum of 20 Record Services in your system.
A maximum of 10 Producer services can be had per Archive service on the Vision


Rules for V2-Master-XXXX Servers

This is the only server type which supports Archive services.

The server can support a maximum of 300Mbits/s VOD bandwidth.

The FG3106-03 and FG3106-03K are limited to 20 simultaneous VoD accesses.

Producer/Record services cannot be added to the server unless there is at least one archive in the system.

More VOD Bandwidth cannot be added to a server unless there is at least one archive on the server.

There area number of other rules depending on how much VOD Bandwidth is allocated to the V2-Master-XXXX Server.
Less than or equal to 50MBits of VOD Bandwidth
A maximum of 50 Max CSE Encoders and 19 other services with the following limitations:
The server can have no more than 10 Reflector services.

The server can have no more than 10 Record services.

The server can have no more than 10 Producer services.

A maximum of 6 Archive services

2
Vision Instruction Manual
License name
Total number of licenses of this type - this is determined by your AMX license
Number of licenses allocated to Vision 2 Servers
Number of licenses of this type still available to allocate to Vision2 servers
Number of licenses
of this type
2
system. For example if you have two
2
system.
Licensing
26