Samsung HG22NA470 Installation Manual page 24

Setting Auto Initialize
¦
When you clone settings from one TV to another, you clone both guest side menu and hotel side menu settings (Picture,
Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all the menu values on your hospitality TVs to the
same, standard settings. If you allow guests access to the guest side menus, for example, the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function on, the TV
automatically restores (initializes) any guest side menu values to the cloned, standard values when the TV is turned off and then
turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been
cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function on.
Menu
Picture Menu
24
English
[HG470_HOTEL-ZA]ENG.indd 24
Menu Item
Mode
backlight
contrast
brightness
sharpness
color
color tone
picture size
black tone
dynamic contrast
shadow detail
gamma
rgb only mode
color space
color
red
blue
green
white balance
R-offset
G-offset
B-offset
R-gain
B-gain
G-gain
flesh tone
edge enhancement
led motion plus
min backlight
Menu Menu Item
srs theatersound
balance
all frequency
Sound Menu
srs trusurround HD
srs trudialog
virtual surround
auto volume
Channel menu
Area
menu language
menu transparency
Set up menu
melody
network set up
network type
2012-03-28 6:07:01