Program Swap; Sleep Timer; Information Display; Child Lock - Technika LCD32-407B User Manual

Program Swap

To switch between the last viewed channel and the current channel you can press the RECALL
button.

Sleep Timer

The TV has a sleep timer function allowing you to turn the TV off after a predetermined time.
1. Press the SLEEP button repeatedly to set the sleep time. SLEEP will appear followed by the
preset time in minutes. Select from:
• 15 minutes
• 45 minutes
• 90 minutes
• 180 minutes
2. Setting the TV to OFF will cancel the sleep timer. The TV will begin to count down from the
preset time. The current countdown time can be viewed by pressing the SLEEP button. When
the sleep timer reaches zero, the TV will switch to standby mode.

Information Display

1. Press the DISPLAY button to display the current channel information. The information will
show the current channel and sound mode settings.
2. Press the DISPLAY button again to remove the current channel information.

Child lock

The child lock allows you to prevent use of various aspects of the TV.
To use the child lock press the H.LOCK button. You will
be asked to enter your password. The default is '0000'.
The following screen will appear.
Lock external input
This option allows you to prevent the use of each of
the input sockets and the TV individually.
1. Highlight the fi rst option on the list. By default it
will be showing TV.
2. Press the button to cycle through the available
input sockets.
3. Press the H.LOCK button to lock that source.
4. Whenever someone attempts to view that source
they will be asked to input the password. If the
password is entered correctly the CHILD LOCK
menu will be shown where they will be able to turn off the lock.
LCD32-407B.indd Sec1:13 LCD32-407B.indd Sec1:13
• 30 minutes
• 60 minutes
• 120 minutes
• 240 minutes.
User Guide
13
14/11/2007 16:02:20 14/11/2007 16:02:20