Connecting To Ac Power - Akai CEU6800-BT Instruction Manual

CONNECTING TO AC POWER

This unit is supplied with an AC adaptor. Please follow the following steps to connect this AC adaptor.
1. Unwind the power cord of the AC adaptor to its full length.
2. Connect the DC plug of the AC adaptor to the DC IN jack on the rear of the unit.
3. Plug the AC adaptor to the AC socket outlet (120V, 60Hz). Connecting this system to any other
power source may cause damage to the system.
Note:
- For sufficient ventilation, please keep other objects or walls at least 10cm away from the unit.
- When the unit is not operated by the AC power or unused for long period of time, please remove the
power adapter from the wall outlet and unplug from the main unit.
POWERING ON/OFF THE UNIT
1. After connecting the AC power, slide the POWER ON/OFF switch in the rear of the unit to 'ON'
position for switching on.
2. The unit is then in 'Bluetooth Mode' if there is no audio connection cable plugged to the AUX IN
jack. (Please see section of 'BLUETOOTH OPERATION' for details.)
3. While an audio connection cable is plugged into the AUX IN jack of the unit, the 'Bluetooth Mode'
will be disabled and you can connect the other end of the cable to external audio device for
playback. (Please see section of 'LISTENING FROM AUX IN JACK' for details.)
4. After using, slide the POWER ON/OFF switch to 'OFF' position to turn off the unit.
EN-7
AC Socket
Outlet
AC Power Adaptor