BON ELECTRONICS BSM-093N3G User Manual page 5

) Power
1
2) Menu
3) Enter
4) SDI 1, SDI 2 Input
5) HDMI/DVI Input
6) Analog
Switch analog input in the order of CVBS1 -> CVBS2 -> CVBS3 -> SVIDEO ->
YPbPr -> RGB -> VGA.
7) WF/VS
Waveform / Vectorscope display selection button.
8) Marker On/Off
9) Scan
Switch scan mode among Zero Scan, Under Scan, Over Scan, Pixel to Pixel in HD
resolution. Zero Scan, Under Scan, Over Scan, Pixel to Pixel in SD resolution.
10) H/V Delay
11) R/G/B Gray
Switch for Red/Green/Blue/Gray only.
12) Function Keys
User-assigned function keys.
13) Headphone Jack
14) Speaker
15) Aspect
Adjust aspect ratio in the order of 4:3, 16:9, Fill, Native.
16) Knob for Adjustment or Enter
Knob used to adjust Brightness / Contrast / Chroma / Phase or Enter button.
 BSM-463N3G,BSM-553N3G Model are Up, Down keys used by the OSD MENU
display.
5