Gpi - BON ELECTRONICS BSM-093N3G User Manual

GPI

GPI Control
Turns on/off external monitor control function.
GPI Port 1,2,3,4,5,6
Assigns each GPI port's function. (e.g. SDI 1 input, HDMI input, Tally Red) See
EXTERNAL REMOTE CONTROLLING section for details.
Remote ID Number
Assigns the ID for the monitor to control through serial port. 0 to 99 can be
assigned.
Serial Remote
Turns serial remote function on. All front buttons are locked on this mode. To exit
from this mode, press and hold Menu button for 3 seconds.
Network Menu
To connect to a network, user should set 'Serial Remote' to Network and use this
menu. Choose DHCP (Auto IP) or Static IP here.
To use Static IP, type all the information including IP Address, Subnet Mask and
Gateway. Otherwise to use DHCP, connect network cable to a proper Router that
can handle all the connection automatically.
Connection Port
This port should be assigned to each monitor device differently to distinguish each
22