Prior To First Use - Vax Navigator RBNAV1B1 User Manual

3 Prior to first use

3.1 Unpacking
3 Prior to first use
CAUTION:
Keep the packaging for storing the appli-
ance, or for safe transport. Always transport
or ship the appliance in its original packag-
ing to avoid damage.
3.2 Positioning the docking station
1 m
5
6
7
11
RBNAV1B1_Navigator_Robot_UG_Amd_190216.indd 12
1 m
1. Unpack the appliance and its accessories.
2. Check the contents for completeness and
possible damage (Fig. 1).
NOTE:
Contact your dealer if you have found dam-
age resulting from transport.
1. If possible, choose a location where there
is no carpet. The rubber feet will adhere
better to a level surface.
2. Locate the docking station in close prox-
imity to a mains socket.
3. Locate the docking station against a wall
or a piece of furniture so it will not be
moved by the robot.
4. Make sure that there is a space of at least
1 m x 1 m in front of and next to the dock-
ing station (Fig. 5).
5. Now remove the 4 protective films from
the rubber feet underneath the docking
station (Fig. 6) and position it in a stable
manner.
CAUTION:
Rubber may cause unwanted stains or dis-
colouring on certain surfaces such as wood.
Check the manufacturer's recommenda-
tions to avoid damage.
6. Have the AC adapter cable placed behind
the station (Fig. 7) so that it does not ob-
struct the robot's ability to dock.
NOTE:
Also remember not to locate the light fence
tower near the docking station. Otherwise
your robot may be impeded from docking to
the station.
19/02/2016 10:43