Huawei S2700 Series Quick Start Manual page 30

S2700&S3700&S5700&S6700 Series Ethernet Switches
Quick Start Guide
l
Issue 12 (2013-07-25)
CAUTION
As an accessory delivered with the chassis, the AC power cable can only be used on this
chassis. Do not use it on any other devices.
Some box switches have a jack reserved for the AC power cable locking latch beside the
AC power socket, as shown in the following figure.
NOTE
l You need to prepare the AC power terminal locking latch yourself if you need it.
l An AC power terminal locking latch is delivered with a pluggable 150 W AC power module,
170 W AC power module, 580 W AC power module, 1150 W AC power module, and RPS1800.
An AC power terminal locking latch can prevent an AC power cable from falling or
loosening. Secure an AC power cable with a locking latch as shown in the following figure.
Connect the RPS power cable. Connect the RPS power cable to the switch according to
Figure A, and connect the RPS power cable to the RPS1800 power supply system according
to Figure B.
NOTE
The S5700-26X-SI-12S-AC, S5700S-LI series and S5700-LI series, except for the S5700-10P-PWR-
LI-AC and S5700-10P-LI-AC, can receive power from an RPS1800.
A
2
1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Device Installation
25