Huawei S2700 Series Quick Start Manual page 18

S2700&S3700&S5700&S6700 Series Ethernet Switches
Quick Start Guide
2.
3.
Issue 12 (2013-07-25)
Install floating nuts.
l Install four floating nuts on the front mounting rails, two on each side. The
S2700/3700/5700/6700 chassis is 1 U high, so the distance between two floating nuts
on one side is 1 U (one mounting hole between them).
l Install four floating nuts on the rear mounting rails, two on each side. The floating nuts
on the rear mounting rails must be on the same horizontal line with the floating nuts on
the rear mounting rails.
Install the chassis in the cabinet.
l 442 mm x 420 mm x 43.6 mm (any switch except the S5710-EI)
CAUTION
The S6700 chassis is heavier than other models, and the front mounting ears are not
strong enough to support the chassis because of the long cantilever. Before installing
an S6700 chassis in a cabinet, install guide rails in the cabinet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Device Installation
13