To Cancel The Fader Function - Sony DCR-TRV250 Operating Instructions Manual

Using the fader function
(1) TO fade in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
TO fade OUt [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
_ FADER -+ M.FADER -4 STRIPE -+ BOUNCE -+ MONOTONE
no indicator _ DOT _, WIPE _ OVERLAP
The last selected fader mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops flashing.
After fade in/out ends, your camcorder automatically returns to the normal
mode.
To cancel the fader function
Before pressing START/STOP, press FADER repeatedly until the indicator disappears.
Notes _ _ _
• Tile OVERLAP, WIPE and DOT functions do not work with tapes recorded in the
t-ti8 I'||m/standard 8 mm [] system. _
• You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
Digital effect _
Color Slow Shutter I_ I_
Super NightShot _
Tape Photo recording _
Interval recording
Frame recording
62