Connecting To A Computer - VTech Innotab 3 User Manual

Connecting to Learning Lodge
Connect to Learning Lodge™ to keep track of your child's learning progress
online. You can also download great apps, e-books, music, videos and themes.
To install the InnoTab
computer, follow the instructions below.
• Insert a mirco SD card into your InnoTab
wish to expand the available memory.
• Turn on your InnoTab
• Locate the USB port on your InnoTab
• Insert the smaller end of the included USB cable into the USB port on your
InnoTab 3 Baby.
®
• Insert the larger end of the USB cable into a USB port on your computer.
The USB port is usually marked with the symbol that appears on the USB
port cover of your InnoTab
Note: The toy is only to be connected to Class II equipment bearing
the following symbol
• When the connection is successful your InnoTab
Baby will show a "Connected to Computer" screen
(image 5).
• If you have not already installed Learning Lodge™ on
your computer, the Learning Lodge™ Setup Program
will automatically launch. Follow the prompts on screen
to complete the installation.
• For help using the Learning Lodge™ refer to the Help
section of the program.
18
TM
3 Baby version of the Learning Lodge™ software on your
®
3 Baby.
®
3 Baby. Please refer to images 3 & 4 below.
®
3
).
3 Baby, as shown above, if you
®
3 Baby and open the rubber port cover.
®
®
4
3
5