Operation; Before Use - Black & Decker BD2000s Original Instructions Manual

5. 12 V d.c. connector out lets
6. 12 V d.c. circuit breaker
7. 5 V USB charger out lets
10. ESC switch
13. Engine switch
17. DC connecting cord
20. Spark plug

6. Before Use.

6. Before Use.
6.1 Important: Electrical safety
- Electric supply cables and connected
equipment must be in perfect condition.
- The generator is to be operated only with
conform to the generator's output voltage.
- Never connect the generator to any other
power supply.
- Keep the cable length to the consumer as
short as possible.
6.2 Connecting to earth
-The housing is allowed to be connected to
earth in order to discharge static electricity.
To do this, connect one end of a cable to the
an earth rod).
6.3 Environmental protection
- Dispose of soiled maintenance material
and operating materials at the appropriate
collection point.
- Recycle packaging material, metal and
plastics.

7. Operation.

7. Operation.
7.1 Before starting the generator.
before you can start the engine.
- Check the fuel level and top it up if
necessary.
ventilation.
- Make sure that the ignition cable is secured
to the spark plug.
- Inspect the immediate vicinity of the
generator.
- Disconnect any electrical equipment which
may already been connected to the generator.
- Never use the generator in dusty area.
7.2 Starting the engine (reversing starter)
Note: when transporting the engine, you
- Note: This generator is equipped with start
fuel tank to make the generator easy started.
Important!
may recoil suddenly as it starts up, resulting
starting the equipment.
7.3 Connecting equipment to the generator