Philips series S5000 Manual page 35

Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when
I press the
on/off button.
Possible cause
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the shaving
heads.
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
without cord.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
ENGLISH
Solution
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads by
following the steps of the
thorough cleaning method
(see chapter 'Cleaning and
maintenance').
Disconnect the shaver from
the mains and press the on/
off button to switch on the
shaver (see section 'Unplug
for use reminder').
Recharge the battery (see
chapter 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
and 'Replacement').
35