Sony KDL-52V5100 Operating Instructions Manual page 13

-
Press
+1+1+1+
to move the on-screen cursor. Press ()
to select/confirm an item.
Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/-.
Press to display a list of convenient functions and menu
shortcuts. The TOOLS menu items vary based on
current input and content.
Press to display the list of External Inputs and TV
mode. To toggle through the inputs, press
+1+.
Press to tum on and off the TV.
Press to mute the sound. Press again or press VOL
+
to
restore the sound.
Press to adjust the volume.
Press 0-9 to select a channel; the channel changes after
a few seconds, or press ENT to change channels
immediately.
Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press
®' 0, CD
and ENT.
[11J
JUMP
~
TOOLS
[§]
CH +/-
[H] +1+1+1+
()
lID
0-9 ENT
[IDO
Guidelines to follow
• Point your remote control directly at the IR sensor located on
your TV.
• Make sure that no objects are blocking the path between the
remote control and the IR sensor on your TV.
• Fluorescent lamps can interfere with your remote control; try
turning off the fluorescent lamps.
• If you are having problems with the remote control, reinsert or
replace your batteries and make sure that they are correctly
inserted.
13