Samsung AQV09T Series User & Installation Manual page 14

Basic function
Operational Demand response
instruction (OI) mode (DRM)*
OI 1 DRM 1
OI 2 DRM 2
OI 3 DRM 3
Press the button to turn on the air conditioner.
Press the button to set the operating mode.
• Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
Press the button to set the desired fan speed.
Auto
Cool
Dry
Fan
Heat
Press the button to adjust the temperature.
Auto You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Cool You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Dry You can adjust the desired temperature by 1°C within the range of 18°C~30°C.
Fan Temperature adjustment is not possible.
Heat You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
• D ry mode is only available in the cooling mode.
SA_BORACAY_IB&IM_EN_DB98-34690A_del_screw.indd 14
AIR CONDITIONER DEMAND RESPONSE MODES
Description of operation in this mode
Indoor fan and Compressor off
The air conditioner continues to cool or heat during the demand
response event, but the electrical energy consumed by the air
conditioner in a half hour period is not more than 50% of the total
electrical energy that would be consumed if operating at the rated
capacity in a half hour period.
The air conditioner continues to cool or heat during the demand
response event, but the electrical energy consumed by the air
conditioner in a half hour period is not more than 75% of the total
electrical energy that would be consumed if operating at the rated
capacity in a half hour period.
(Auto)
(Auto), (Low), (Med),
(Auto)
(Low), (Med), (High)
(Auto), (Low), (Med),
English-14
Mandatory for compliance with
this Standard (AS/NZS 4755.3.1)
(High)
(High)
Yes
No
No
5/14/2015 2:48:47 PM