Table of Contents
Advertisement
Network Security Protocols
The TV only supports the following wireless network security protocols and is unable to connect to
non-certified wireless routers:
●
Authentication Modes: WEP, WPAPSK, WPA2PSK
●
Encryption Types: WEP, TKIP, AES
If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the
Encryption Type to WEP or TKIP, Samsung SMART TVs will not support the connection in compliance
with the new Wi-Fi certification specifications.
If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network
using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically
configures the SSID and WPA key settings.
Wired Network Setup
가상리모컨
Menu
¤
>
Network
Network Status
Network Settings
Wi-Fi Direct
AllShare Settings
Device Name
"
The displayed image may differ depending on the model.
Automatic Wired Network Setup
The TV's wired network connection is automatically configured when it is connected to a network that
supports DHCP.
11
Network type
Set
21
The TV attempts to connect to the network. A confirmation message is then shown once a
connection is established. Select
manually.
Network
Network Settings
m
>
>
[TV]Samsung LE...
Wired
and then select Connect.
to
OK
Try Now
to proceed. If the attempt fails, try again or connect
Advertisement
Table of Contents
