Picture Test; Sound Test; Motion Control Environment Check; Signal Information - Samsung X12ATSCF E-Manual

Picture Test

가상리모컨 Menu
¤
>
The Picture Test displays a high definition picture to examine it for flaws or faults.
If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact
Samsung's Call Center for assistance. If the test picture is displayed properly, there may be a problem
with the external device. Please check the connections. If the problem persists, check the signal
strength or refer to the external device's user manual.

Sound Test

가상리모컨 Menu
¤
>
Use the built-in melody to check for sound problems.
If no melody is played by the TV's speakers, make sure
try again. If the problem persists, there may be a problem with the TV. Contact Samsung's Call Center
for assistance. If the melody is played, there may be a problem with the external device. Please check
the connections. If the problem persists, refer to the external device's user manual.

Motion Control Environment Check

가상리모컨 Menu
¤
>
Test the the brightness levels to see if they are suitable for SMART Interaction use.

Signal Information

가상리모컨 Menu
¤
>
The signal Information displays the digital channel signal information and strength. Users can then
adjust the antenna to increase the signal strength and receive HD channels. This option is only
available for digital channels.

Reset

가상리모컨 Menu
¤
>
This resets all settings to the factory default settings except for the network settings. Select Reset,
enter the PIN code when requested, and then select Yes. All settings are then reset. The TV turns off
and on again automatically and then displays the
TV, refer to the user manual that came with the TV.
Support Self Diagnosis
m
> >
Support Self Diagnosis
m
> >
Support Self Diagnosis
m
> >
Support Self Diagnosis
m
> >
Support Self Diagnosis
m
> >
Picture Test
>
Try Now
Sound Test
>
Try Now
Speaker Select
Motion Control Environment Check
>
Signal Information
>
Reset
>
Try Now
Setup
screen. For more information on resetting the
TV Speaker
is set to
Try Now
Try Now
and then