Endless Loop Recording - Panasonic HC-V550 Owner's Manual

Endless Loop Recording

≥ Insert an SD card.
≥ Change the Recording Mode to
1 Select sound in loop recording setting.
[ON]: Records sound.
[OFF]: Recording of sound is off.
2 Start recording.
≥ Once you start recording, the scene will be automatically divided every 2 minutes. The divided
scenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to
30 scenes will be saved.)
≥ When the period between the time you start recording and the time you stop recording is longer
than 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recording
will be saved. The part before the 1 hour part will be deleted.
≥ Recording stops automatically when approximately 24 hours have passed since the start of the
recording.
≥ During recording, the
≥ The remaining recordable time and elapsed recording time are not displayed.
≥ Only when sound in loop recording is set to [ON],
displayed.
To switch sound in loop recording
The menu can be set to switch to sound in loop recording.
: [RECORD SETUP] # [Sound In Loop Recording] # [ON] or [OFF]
MENU
≥ Still pictures cannot be taken.
≥ [REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720].
≥ HC-V550
Image Stabilizer Function is set to
HC-V250
Image Stabilizer Function is set to
≥ Endless Loop Recording is not possible in the following cases:
j When the SD card is not inserted
j When the approximate remaining recordable time on the SD card is less than 1 hour
(The time between R 0h00m and R 0h59m flashes red.)
≥ Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient to
play back loop-recorded scenes by date.
(The date displayed on the date list will be the one on which you started Endless Loop
Recording.)
. (l 43)
blinks.
(setting canceled) and Level Shot Function is set to off.
(setting canceled).
(l 82)
- 52 -
(microphone input level meter) is
(l 22)