Quick Start; Close The Lcd Monitor - Panasonic HC-V550 Owner's Manual

[QUICK START]

This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 50% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥ Quick Start will not work if there is no SD card inserted.
1 Select the menu.
: [SETUP] # [QUICK START] # [ON]
MENU
2

Close the LCD monitor.

The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥ HC-V550
The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ About 5 minutes have passed, the Quick Start Standby Mode is canceled, and the unit is turned
off.
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(l 33)/[ECONOMY (AC)]
≥ Turn the unit off using the power button.
[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
: [SETUP] # [ALERT SOUND] # desired setting
MENU
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen.
(l 33), close the LCD monitor once and open it again.
(Volume high)/[OFF]
- 34 -
(l 184)

