Using "Classic" Powerkey - Sophisticated Circuits PowerKey Pro 200 User Manual

Appendix 1

Using "Classic" PowerKey

The PowerKey version 3 software is fully compatible with the
original PowerKey. If you upgrade from version 1.x or 2.x, you
will need to rebuild any scheduled Events you had before.
Some of the features of the version 3 software will not be
available, as they depend on features of the PowerKey Pro
hardware: The "When Phone Rings" Trigger, the "When Power
Returns" Trigger, and the "Switch Outlets" Action.
Installing PowerKey
The diagram below shows an example setup.
(2)
(1)
(1) PowerKey ADB cable. (2) Branching connector.
Page 78 Appendices