Cancelling The Program; End Of Program - Beko DS 7331 PA0 User Manual

Operating the product
5.10 Changing the program after
starting
After the tumble drier starts running, you may dry your
laundry in a different program by changing the selected
program.
• For instance, in order to select Extra Dry instead
of Iron Dryness program, select the Extra Dry
program by turning the On/off/program selection
button.
Start the p rogram by pressing the Start/Pause button.
Adding or removing laundry during pause
If you want to add or remove laundry after the drying
program has started:
• Put the tumble drier into Pause position by
pressing the Start/Pause button. Drying process
stops.
• Open the loading door in Pause position, and close
the door after adding or removing laundry.
• Start the program by pressing the Start/Pause
button.
C
The process of adding laundry after
the start of drying process might lead
to mixing of wet laundry with the dried
laundry inside the tumble drier and some
damp laundry at the end of process.
C
Laundry adding and removing process
can be repeated as many times as desired
during drying. But this process leads
to extension in the program time and
increase in energy consumption since
it will repeatedly interrupt the during
process. Therefore, it is recommended to
add laundry before starting the program.
C
If a new program is selected by changing
the position of program selection button
while the tumble drier is paused, the
running program ends.
Do not contact the inner surface of drum
while adding or removing laundry during a
running program. Surface of drum is hot.
Dryer / User Manual

5.11 Cancelling the program

When you want to cancel the program and end the
drying process for any reason after the tumble drier has
started operation, the program is cancelled by turning
the On/off/program selection button.
A
WARNING: When you cancel the program
during the operation of tumble drier, inner
part will be extremely hot; therefore,
allow it to cool down by running the airing
program.

5.12 End of program

At the end of program, Fibre Filter Cleaning and Water
Tank warning symbols on the program monitoring
indicator turn on. Loading door can be opened, and the
tumble drier will be ready for a second operation.
In order to turn off the tumble drier, put the On/Off/
Program selection button in On/Off position.
C
When the laundry isn't removed after the
end of program, 2-hour anti-creasing
function is enabled in order to prevent
creasing of laundry. Program spins the
laundry at intervals of 10 minutes, and
prevents creasing.
C
Clean the fibre filter after each drying.
(See: "Fibre filter and Loading door inner
surface")
C
Drain the water tank after each drying.
(See: "Draining the water tank")
21 / 56 EN