Sony DCR-HC32 Operating Manual page 78

Creating a DVD (Direct Access to
"Click to DVD") (continued)
1
Turn on the computer.
Quit all applications running with an
i.LINK.
2
Prepare the power source for
your camcorder, then slide the
POWER switch down to turn on
the PLAY/ EDIT lamp.
Use the supplied AC Adaptor as the
power source since it takes a few hours
to create a DVD.
3
Insert a recorded cassette into
your camcorder.
4
Connect your camcorder to a
computer via an i.LINK cable
(optional) (p. 77).
• When you connect your camcorder to
a computer, make sure you insert the
connector in the correct direction. If you
insert the connector forcibly, it may be
damaged, and causes a malfunction of your
camcorder.
• For details, see "First Step Guide".
5
Touch
(EDIT/PLAY)  [BURN DVD] 
.
"Click to DVD" starts up and the
on-screen instructions appear on your
computer.
6
Place a writable DVD in the disc
drive of the computer.
78
 [MENU] 
7
Touch [EXEC] on the screen of
your camcorder.
60min
BURN DVD
START
CREATE DVD?
EXEC
The status of the operation on your
computer is displayed on the LCD
screen of your camcorder.
CAPTURING: The picture recorded
on the tape is being copied to the
computer.
CONVERTING: The picture is being
converted to the MPEG2 format.
WRITING: The picture is being written
onto the DVD.
• If you use a DVD-RW/+RW which has
other data stored on it, the message [This
is a recorded disc. Delete and overwrite?]
appears on the LCD screen of your
camcorder. When you touch [EXEC], the
existing data is erased and new data is
written.
8
Touch [NO] to finish creating a
DVD.
60min
BURN DVD
COMPLETED
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y o p e n s .
YES
The disc tray comes out automatically.
To create another DVD with the same
content, touch [YES].
The disc tray comes out. Place a new
writable DVD in the disc drive. Then,
repeat step 7 and 8.
0:00:00:00
CANCEL
0:00:00:00
NO