Recording Sound; To Stop Recording - Sony DCR-HC32 Operating Manual

Dubbing sound to a recorded tape
(continued)
viewfinder.
• For DCR-HC42:
When you attach an external microphone
(optional) to the Active Interface Shoe,
you can check the picture and the sound by
connecting your camcorder to a TV using the
A/V connecting cable. However, sound you are
recording afterwards is not output from your
camcorder. Check the sound using a TV or
other device.
• Do not connect A/V connecting cables to both
your camcorder and the Handycam Station at
the same time. The sound may be distorted.
64

Recording sound

Insert a recorded cassette into your
camcorder beforehand.
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Touch (Play/Pause) to play
back the tape, then touch it again
at the point where you want to
start recording the sound.
3
 [MENU] 
Touch
(EDIT/PLAY)  [AUD DUB CTRL]
  [AUDIO DUB].
 appears
60min
AUD DUB CTRL
4
Touch (play) and start
playing back the audio you want
to record at the same time.
appears while recording the new
sound in stereo 2 (ST2) during the
playback of the tape.
5
Touch (stop) when you want

to stop recording.

To dub on other scenes, repeat step 2
to select scenes, then touch [AUDIO
DUB].
6

Touch
0:00:00:00
AUDIO
DUB
.