Specific Safety Rules - Makita HR2460 Instruction Manual

ENGLISH
1 Switch trigger
2 Lock button
3 Lamp
4 Reversing switch lever
5 Action mode changing knob
6 Grip base
7 Side grip
8 Loosen
SPECIFICATIONS
Model
Capacities
Concrete
Tungsten-carbide tipped bit ............................. 24 mm
Core bit ............................................................ 54 mm
Diamond core bit (dry type) ............................. 65 mm
Steel ................................................................... 13 mm
Wood .................................................................. 32 mm
-1
No load speed (min ) ........................................ 0 – 1,100
Blows per minute................................................ 0 – 4,500
Overall length ...................................................... 362 mm
Net weight ...............................................................2.5 kg
Safety class ...........................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to rotary hammer safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
4
Explanation of general view
9 Tighten
10 Teeth
11 Protrusion
12 Bit shank
13 Bit grease
14 Bit
15 Chuck cover
16 Depth gauge
4.
HR2460/HR2460F
5.
6.
7.
/II
8.
9.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
12. Do not point the tool at any one in the area when
13. Do not touch the bit or parts close to the bit
14. Some material contains chemicals which may be
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
GEB007-2
injury.
17 Dust cup
18 Blow-out bulb
19 Keyless drill chuck
20 Chuck adapter
21 Sleeve
22 Ring
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
Be sure the bit is secured in place before opera-
tion.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
only when hand-held.
operating. The bit could fly out and injure some-
one seriously.
immediately after operation; they may be
extremely hot and could burn your skin.
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.