Canon HR10 Instruction Manual page 50

Video
• In standby mode, the camcorder will
shut off after the time selected for the
[ STANDBY OFF] setting.
STANDBY OFF
[ 10 min], [
[ 30 min]
Select the length of time after which the
camcorder will end the standby mode
and shut off automatically.
IMG QUALITY
Disc quality: HD only
[ SUPER FINE], [
[ NORMAL]
Select the quality of a still image
captured from a scene recorded in HD
quality.
FILE NOS.
* : only with discs recorded in
HD quality.
[ RESET], [ CONTINUOUS]
Select the image numbering method to
be used on a new memory card.
Images are automatically assigned
consecutive image numbers from 0101
to 9900, and stored in folders
containing up to 100 images. Folders
are numbered from 101 to 998.
[ RESET]: Image numbers will restart
from 101-0101 every time you insert a
new memory card.
50
( 36)
20 min],
FINE],
*
[ CONTINUOUS]: Image numbers
will continue from the number following
that of the last image recorded with the
camcorder.
• If the memory card you insert already
contains an image with a larger
number, a new image will be assigned
a number one higher than that of the
last image on the memory card.
• We recommend using the
[ CONTINUOUS] setting.
TV TYPE
[ NORMAL TV], [
In order to display the picture in full and
in the correct aspect ratio, select the
setting according to the type of
television to which you will connect the
camcorder.
[ NORMAL TV]: TV sets with 4:3
aspect ratio.
[ WIDE TV]: TV sets with 16:9
aspect ratio.
• The setting cannot be selected while
the camcorder is connected to an
HDTV using an HDMI cable.
• When the TV type is set to
[ NORMAL TV], if you play back a
recording made in Widescreen (16:9)
the picture displayed on the LCD
screen will be smaller than the full
display area.
• When the TV type is set to
[ NORMAL TV], still images
cannot be captured from the
playback scene (
WIDE TV]
80).