Planet Networking & Communication FRT-415N User Manual page 10

User Friendly Interface: The FRT-415N can be managed and controlled through Web UI.

DMZ Support: The FRT-415N can translate public IP addresses into private IP address to

allow unlimited 2-way communication with the servers or individual users on the Internet. It
provides the most flexibility to run programs smoothly for programs that might be restricted in
NAT environment.
RIP1/2 Routing: It supports RIPv1/2 routing protocol for routing capability.

IPv6 Support: The FRT-415N supports IPv6 for new services and higher security.

LAN Features

4-port Switch: The FRT-415N incorporates a 4-port 10/100BASE-TX switching hub,

making it easy to create or extend your LAN.
DHCP Server Support: Dynamic Host Configuration Protocol provides a dynamic IP address

to PCs and other devices upon request. The FRT-415N can act as a DHCP Server for
devices on your local LAN.
Wireless Features

Supports IEEE 802.11b, g and n Wireless Stations: The 802.11n standard provides

backward compatibility with the 802.11b and 802.11g standard, so 802.11b, 802.11g, and
802.11n can be used simultaneously. IEEE 802.11n wireless technology is capable of having
a data rate of up to 300Mbps.
Two External Antennas with MIMO Technology: The FRT-415N provides farther coverage,

less dead spaces and higher throughput with 2T2R MIMO technology.
WPS Push Button Control: The FRT-415N supports WPS (Wi-Fi Protected Setup) for users

to easily connect to wireless network without configuring the security.
WEP Support: WEP (Wired Equivalent Privacy) is included. Key sizes of 64 bit and 128 bit

are supported.
WPA-PSK Support: WPA-PSK_TKIP and WAP-PSK_AES encryption are supported.

Wireless MAC Access Control: The Wireless Access Control feature can check the MAC

address (hardware address) of wireless stations to ensure that only trusted wireless stations
can access your LAN.
10
User Manual of FRT-415N