Table of Contents
Advertisement
TG37xx38xxBX(e).book Page 53 Wednesday, June 8, 2011 2:08 PM
Problem
Cause/solution
I cannot operate the
L The remote access code is not set. Set the remote access
answering system
remotely.
L You are entering the wrong remote access code. If you have
L Press each key firmly.
L The answering system is turned off. Turn it on (page 40).
Dial lock
Important:
L Anyone can turn off the dial lock using the following method. Be sure to keep these
operating instructions in a safe place in order to prevent unauthorized persons from
using your phone without permission.
Problem
Cause/solution
I cannot remember the
L Turn the dial lock off using the following method.
dial lock password.
Liquid damage
Problem
Cause/solution
Liquid or other form of
L Disconnect the AC adaptor and telephone line cord from the
moisture has entered the
handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
code (page 40).
forgotten your remote access code, enter the remote access
code setting to check your current code (page 40).
*1
Y Handset / _ Base unit
*1
KX-TG3811/KX-TG3821 series: page 4
1
Proceed with the operation for your unit.
Handset: {MENU}y251
Base unit: {DIAL LOCK}
2
Press *7zzz.
3
Proceed with the operation for your unit.
Handset: {OK} 2 times s {OFF}
Base unit: {4} 2 times
base unit. Remove the batteries from the handset and leave
to dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the
unit does not work properly, contact an authorized service
center.
Useful Information
53
Hide quick links:
Advertisement
Table of Contents
