Panasonic KX-TG3711BX Operating Instructions Manual page 30

TG37xx38xxBX(e).book Page 30 Wednesday, June 8, 2011 2:08 PM
Programming
Sub-menu 1 Sub-menu 2
Line Setup Dial Mode
Flash Time
*2, *5, *15
Privacy Mode
Register Register H.set
Cancel Register
Power Failure
*12
Language
*1 KX-TG3721/KX-TG3821 series: page 3, 4
*2 If you program these settings using one of the handsets, you do not need to program the same
item using another handset. (KX-TG3712/KX-TG3722/KX-TG3822)
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 If the Caller ID time and date display service is available in your area, this feature allows the
unit to automatically adjust the date and time each time caller information including date and
time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual". (Caller
ID subscribers only) To use this feature, set the date and time first (page 17).
*5 KX-TG3712, KX-TG3722, KX-TG3811/KX-TG3821 series (page 4)
*6 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*7 KX-TG3721 series: page 3
*8 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*10KX-TG3811/KX-TG3821 series base unit
You can adjust the contrast of the base unit display by performing the following operation.
{DISPLAY} s {r}: "Contrast" s {4} s {r}: Select the desired setting. s {4}
*11Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*12KX-TG3711BX/KX-TG3712BX/KX-TG3719BX/KX-TG3721BX/KX-TG3722BX/
KX-TG3811BX/KX-TG3821BX/KX-TG3811JX/KX-TG3821JX/KX-TG3822JX
*13If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
30
Setting
*2
1: Pulse
2: <Tone>
*2, *14
0: 900 msec.
1: <700 msec.>
2: 600 msec.
3: 400 msec.
4: 300 msec.
5: 250 msec.
*: 200 msec.
#: 160 msec.
6: 110 msec.
7: 100 msec.
8: 90 msec.
9: 80 msec.
– 1: On 0: <Off>
–
*3
–
– 1: <Auto> 0: Off
– 1: <English>
2:
3:
Code
+
#120 17
#121 20
#194 –
#130 54
#131 54
#152 22
#110 17