Charger Confirmation; Toothbrush Handle; Brush Head - Philips CleanCare+ hx3214 Manual

ENGLISH
14

Charger confirmation

The handle beeps and vibrates briefly when it is placed on the
charger base. This Philips Sonicare toothbrush comes with the
charger confirmation feature activated.
Cleaning
You should clean your Philips Sonicare toothbrush regularly to
remove toothpaste and other residue. Failure to clean your Philips
Sonicare toothbrush may result in an unhygienic product and
damage to it may occur.
Warning: Do not clean brush heads, the handle or the charger in the
dishwasher.

Toothbrush handle

1 Remove the brush head and rinse the metal shaft area with warm
water. Make sure you remove any residual toothpaste (Fig. 9).
Caution: Do not push on the rubber seal on the metal shaft with
sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp cloth.

Brush head

1
Rinse the brush head and bristles after each use (Fig. 10).
2 Remove the brush head from the handle and rinse the brush
head connection with warm water at least once a week. Rinse the
travel cap as often as needed.
35_021_0678_1_DFU-Simple_A6_v1.indd 14 18/11/15 11:25