Advertisement
INTELLIGENT CLEANER
OPERATING MANUAL
3. Clean the chamber where the brush is located and the contaminants on brush
and rubber brush.
4. Wipe out dirt on the metal shaft and bearing of the brush coupler and the brushes
(this may not be necessary to do after every cleaning) as per following drawings. If
necessary, you may add a little lubricant to it.
5. Put the brush coupler and brushes back and tighten the screw.
Clean the vacuum inlet lid
1. Turn off the power switch; turn the Cleaner upside down on flat surface.
2. Take the Vacuum Inlet Lid out as per following drawing:
3. Clean the Vacuum Inlet Lid and the fan-shaped mechanism to ensure good
ventilation.
4 .Guide the hinge tabs on the Vacuum Inlet Lid back into their holes carefully.
- 12 -
Advertisement
