Recalling saved settings in the PCL drivers is a simple task that
must be done first, before any job-specific changes are made.
Rather than repeat the procedure throughout this manual, it is
described here.
S
AVING A SET OF DRIVER SETTINGS
1.
Make any changes to the driver settings you want, as
described in the relevant section of this manual.
2.
In the driver's [Setup] tab, click [Save...].
3.
Enter a meaningful name for the settings you are saving,
and click [OK].
R
ECALLING SAVED DRIVER SETTINGS
1.
In the driver's [Setup] tab, choose any previously saved
[driver settings] you need.
2.
Proceed to make any other adjustments for this job, as
described in the relevant section in this manual.
A guide to printing > 28