Rand McNally RoadExplorer 70 User Manual page 41

Avoid Options
Avoid Route
Avoid Area
Road Explorer 70 User Manual
™
Avoid List
From the map, set specific locations to avoid. Tap the map and select
Permanent Avoid. Choose Avoid Route, Avoid Road, or Avoid
Area. Or, if the location is along an active route, choose Detour.
The avoided routes, roads, or areas are added to an Avoid List. The list is
located in GPS > Preferences > Route > Manage Avoid List.
Avoid Route
Choose whether to avoid an upcoming distance on an active route,
in the left column, or a specific road section, in the right column.
Or, select Avoid Entire Route. The route is recalculated and the
avoided sections are added to the Avoid List, under Routes.
Avoid Road
Add the selected road segment to the Avoid List, under Roads.
(Note: Reposition the map after zooming in or out to be sure
to select the right location.) Road segments that have been
permanently avoided are shown in pink on the map when zoomed
in. Tap on a segment and tap Remove Avoid to remove the
segment from the Avoid List.
Detour
Detour around a road segment on an active route. The route is
recalculated, but the road segment is only avoided temporarily and
does not appear on the Avoid List. To cancel the detour, tap the icon
in the lower left-hand corner of the map screen and select Detour.
Avoid Area
Set an area on the map to avoid. Increase/decrease the size of the
buttons. Tap Save to add the area to the
area using the and
Avoid List, under Areas. Enter a name for the area. If an active route
has been entered, the route does not recalculate. Avoided areas are
shown on the map in pink.
To remove items from the Avoid List, tap Manage Avoid List in
Preferences > Route. Tap the
3.
to remove.
GPS
37