Advanced - Linksys LAPN300 User Manual

Untagged Specifies a number between 1 and 4094 for the untagged
VLAN ID VLAN ID. The default is 1. Traffic on the VLAN that you
specify in this field is not be tagged with a VLAN ID when
forwarded to the network.
Untagged VLAN ID field is active only when untagged VLAN
is enabled.
VLAN 1 is the default for untagged VLAN.
Management The VLAN associated with the IP address you use to
VLAN
connect to the access point. Provide a number between 1
and 4094 for the Management VLAN ID. The default is 1.
IPv4/v6
IP Settings Select Automatic Configuration or Static IP Address.
IP Address Enter an unused IP address from the address range used on
your LAN.
Subnet Mask Enter the subnet mask for the IP address above.
Default
Enter the gateway for the IP address above.
Gateway
Primary DNS Enter the DNS address.
Secondary Optional. If entered, this DNS will be used if the Primary
DNS
DNS does not respond.

Advanced

Configure advanced network settings of the access point.
Figure 15: Advanced Screen
24