Sony GRAND WEGA KF-60DX100 Operating Instruction page 15

lnfr~ducin~ the Sony LCD Projection TV
5
Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
3
of the lamp or the surrounding parts.
T
8
Loosen the two screws with the
Hold the handle and pull
hex key supplied with the lamp.
straight out.
6 After it has cooled, place the removed lamp into the'empty box of the
%
replacement lamp. Never put the removed lamp into a plastic bag.
2
6
Mount the new lamp.
Be sure to attach the new lamp securely.
Mount the new lamp securely
into the lamp receptacle.
Tighten the two screws securely in the
order of 0 to 0, as shown in the
illustration using the supplied hex key.
7 Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
Match the projection of the right
side of the lamp cover with the
hole of the unit, and replace the
lamp cover as rt was.
6 If the lamp cover is not mounted securely, the self-diagnostic
function works and the TIMER/STAND BY indicator flashes for three
times (See page 85).
(Continued)
15