Sony GRAND WEGA KF-60DX100 Operating Instruction page 24

installing and Connecting the L
projection TV
q
TO CONVERTER
q
VHF/UHF
q
S VIDEO
(Rear and side)
q
VIDEO
(L/R)/AUDIO
(Rear and side)
q
HD/DVD IN (108Oi,
72Op, 48Op, 480i)
q
TV OUT
q
AUDIO OUT
(VAR/FIX)
L (MONO)/R
q
CONTROL S
IN/OUT
Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in Twin View.
This is a VHF/UHF OUT jack that lets you set up yom
LCD projection TV to switch between scrambled channels
(through a cable box) and normal cable channels (CATV).
Use this jack instead of a splitter to get better picture
quality when switching between scrambled and
unscrambled cable channels.
Connects to your VHF/UHF anten% or cable.
Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHFUjacks or the Video IN
jack.
n
Connects to the audio and video OUT jacks on
your
VCR
or other video component. A fourth video input (VIDEO
2) is located on the side panel of the LCD projection TV.
Connects to your DVD player's or Digital Set-top box's
component video (Y, PB, PR) and audio (L/R) jacks.
Connects to an AV receiver for greater control of all audio
and video equipment (see page 40). For detailed
information about connection, refer to the operating
manual supplied with the AV receiver.
Connects to the left and right audio inputs of
your
audio or
video component.
To control other Sony equipment with the LCD projection
TV's remote control, connect the CONTROL S IN jack of
the equipment to the CONTROL S OUT jack on the LCD
projection TV with the CONTROL S cable.
To control the LCD projection TV with a remote control
for another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
LCD projection TV with the CONTROL S cable.
24