Indicator Light; Audible Indicators - Oakley O ROKR Pro User Manual

INDICATOR LIGHT

The indicator light on O ROKR Pro provides the following information:
DURING PAIRING
DURING CHARGING
WHILE WIRELESSLY CONNECTED
TO A DEVICE
WHILE NOT CONNECTED TO A DEVICE
WHILE POWERING UP
WHILE POWERING DOWN
Note the following:
• Bluetooth Sniff Mode technology ensures that power usage is minimized.
• The only time O ROKR Pro does not use power is when it is completely turned off. However, even when
not used, the internal rechargeable battery gradually loses power over time and requires recharging.

AUDIBLE INDICATORS

Sound tones provide the following information:
DUAL HIGH/LOW TONE EVERY 60 SECONDS
NO AUDIBLE TONES; DETERIORATING
AUDIO QUALITY; SKIPPING MUSIC
SINGLE HIGH TONE DURING
VOLUME ADJUSTMENT
RING TONE
SINGLE HIGH TONE
SINGLE LOW TONE
DUAL HIGH/LOW TONE
SINGLE MEDIUM TONE EVERY 20 SECONDS
FOUR TONES, LOW TO HIGH
FOUR TONES, HIGH TO LOW
The light is solid red. It to flashes green ten times when pairing is successful.
Solid green = fully charged
Solid amber = 99% to 50% charged
Solid red = 49% to 0% charged
The light flashes every 4 seconds:
Green indicates 100% to 67% charge remaining.
Amber indicates 66% to 34% charge remaining.
Red indicates 33% to 0% charge remaining.
The light flashes twice in red every 4 seconds.
The light flashes red > amber > green > green.
The light flashes green > amber > red > red.
Low battery.
Out of range.
(Move O ROKR Pro closer to your phone or Bluetooth enabled audio device.)
Maximum or minimum volume level has been reached. Phone mode only.
Incoming call.
Enter pairing mode. Pairing is confirmed.
Initiate voice activation.
(Speak the name of the person you want to dial.)
Voice tag not recognized.
(The name of the person you want to dial was not recognized.)
Microphone is muted.
O ROKR Pro is turned off.
O ROKR Pro is turned on.
9