Changing The Lenses - Oakley O ROKR Pro User Manual

CHANGING THE LENSES

The lenses of O ROKR Pro can be easily changed. The instructions below show you how to remove the current lenses and install a different
set.
WARNING: Follow these instructions carefully. Failure to do so may adversely affect optical performance. Improperly installed lenses may
fail to stay in place, causing interference with your vision.
To remove the lenses:
1. Hold the frame upside down as shown in Figure 1. Grip the lens with one
2. Gently flex the frame by applying upward pressure with your thumb and
To install new lenses:
1. Hold the frame upside down as shown in Figure 1. Slide the lens into
2. Rotate the lens into the frame groove until the inner edge tab slides
3. Hold the lens firmly. With your other hand, slide your thumb along the
1
hand. Grip the frame with your other hand by placing your index finger on
the nose bridge and your thumb beneath the frame rim.
outward pressure with your index finger. (See Figure 2.) Pull the lens out
of the groove.
1
place so the outer edge tab fits into the frame slot.
gently into the frame slot.
frame edge until the inner lens tab snaps firmly into place.
2
2 3
11