Oakley Frame And Lens Technology; Cleaning - Oakley O ROKR Pro User Manual

OAKLEY FRAME AND LENS TECHNOLOGY

You're now wearing the best eye protection on earth.
Only Oakley utilizes pure Plutonite
while inherently blocking 100% of all UVA, UVB, UVC and harmful blue light. Oakley performance eyewear also takes advantage of
patented XYZ Optics ® , a breakthrough that maintains precise clarity at all angles of vision and extends the range of optical correction to
the periphery of dual-spherical eyewear lenses and single-lens sports shields.
All Oakley sunglasses satisfy ANSI Z80.3 & EN 1836 standards for optical and mechanical performance and are in accordance with the
EC Directive 89/686/EEC for the I.P.D. of category I corresponding to the European Community. Light transmission ranges from 10% to
39% of available light. All transmission profiles are based on data obtained according to ANSI Z80.3 and EN 1836 test protocols.
LENS TINT TRANSMISSION PROFILES
Grey: 18%
protection index 2
Bronze Iridium: 22%
protection index 2
Black Iridium: 10%
protection index 3
The sunglass lens type is printed on the package. The corresponding protection index can be found in the Lens Tint Transmission Profiles
chart above.
Protection Index (in compliance with the standard EN 1836)
Index 0: Aesthetic, very low protection
Index 1: For weak sun luminosity
Index 2: For average sun luminosity
Index 3: For strong sun luminosity

CLEANING

How to keep the best at their best
All Oakley Lenses: To help maintain the High Definition Optics
woven electrostatic Microclear
Plutonite lenses. Hand wash and air-dry the Microclear bag regularly. Iridium
reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The
12-micron jacket of Iridium must be treated with special care to avoid scratching. Never use cleaning solutions. Use only mild soap and
water, and dry by gently blotting with the Microclear bag provided.
When cleaning O ROKR Pro, please note the following:
• O ROKR Pro is not waterproof. Moisture may damage the electronic circuitry. Do not rinse or immerse any part of the frame.
Keep the frame dry at all times.
• Before cleaning, make sure O ROKR Pro is unplugged from the wall charger.
• Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive cleaning compounds or solvents. These
substances may damage the lens coatings or leak into the module and damage the electronic circuitry.
• Should a lens become scratched, have it replaced immediately to ensure your vision is not compromised.
lens material, a proprietary synthetic that exceeds the optical requirements of ANSI Z87.1 standards
®
™ bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure
® (HDO ® ) of Oakley lenses, your new eyewear comes with a specially-
® Lenses: Oakley Iridium lens coating is engineered to
10