FujiFilm FINEPIX J20 Owner's Manual page 94

88
Warning Messages and Displays
Warning Description Solution
Format the memory card and select RENEW for the
The camera has run out of frame numbers
1m
FRAME NO. option in the
G
SETUP menu. Take
FRAME NO. FULL
(current frame number is 999-9999).
a picture to reset frame numbering to 100-0001,
then return to the
1m
FRAME NO. menu and select
CONTINUOUS.
TOO MANY FRAMES
Date for which more than 4,999 pictures exist
Choose a different date.
selected in sort-by-date view.
CAN NOT EXECUTE
Red-eye reduction can not be applied to the
:: CAN NOT EXECUTE selected picture or movie.
-
PROTECTED FRAME
An attempt was made to delete or rotate a
Remove protection before deleting or rotating
protected picture. pictures.
mil
NO IMAGE
The source device selected in the playback
Select a different source.
~
NOIMAGE COpy menu contains no pictures.
~
CAN NOT TRIM
An attempt was made to crop a
~
picture.
CAN NOTTRIM
The picture selected for cropping is damaged These pictures can not be cropped.
or was not created with the camera.
DPOF FILE ERROR
The DPOF print order on the current memory Copy the pictures to internal memory and create a
card contains more than 999 images.
new print order.
CAN NOT SET DPOF
The picture can not be printed using DPOF. -
:: CAN NOT SET DPOF
Movies can not be printed using DPOF.
-
CAN NOT ROTATE
The picture can not be rotated.
-
:: CAN NOT ROTATE
Movies can not be rotated. -
PRESS AND HOLD THE DISP
An attempt was made to choose a flash
Exit silent mode before choosing a flash mode or
BUTTON TO DEACTIVATE
mode or adjust the volume with the camera
SILENT MODE
in silent mode.
adjusting the volume.
A connection error occurred while pictures
Confirm that the device is turned on and that the USB
COMMUNICATION ERROR
were being printed or copied to a computer
cable is connected.
or other device.