Connecting The Camera - FujiFilm FINEPIX J20 Owner's Manual

Connecting the Camera
1
If the pictures you wish to copy are stored
on a memory card, insert the card into the
camera (pg. 8). If no card is inserted, pictures
will be copied from internal memory.
[l] Caution
Loss of power during transfer could result in loss
of data or damage to internal memory or the
memory card. Check the battery level.
2
Turn the camera off and connect the supplied
USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.
~ .""
. i : . -
4>."'.: .
/ '
..
. . .
.
,
.'.
.
,
.
Viewing Pictures
on
a Computer
3
Press the [E] button for about a second to
turn the camera on. FinePixViewer
will
start
automatically and the "Save Image Wizard"
will be displayed. Follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click
CANCEL.
[] Caution
If FinePixViewer does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
"'Note
The camera will not turn off automatically while connected to a computer.
53