TechniSat DiGYBOXX T4 Operating Instructions Manual page 31

Confirm by pressing the OK button.
>
The Timer organizing submenu appears.
Use the up/down arrow buttons to select the New video recorder timer
>
option.
Pressing the OK button opens an input screen where you can program a new timer
>
event.
To program the timer, proceed as follows:
Source
Use the arrow buttons to highlight the Source row.
>
Press the OK button.
>
Use the arrow buttons to highlight the desired programme.
>
Pressing the OK button will store your selection in thetimer.
>
Date
Use the arrow buttons to highlight the Date column.
>
Use the number buttons to enter the date (4 digits) on which the timer event is
>
to take place.
Start
Use the arrow buttons to highlight the Start column.
>
Use the number buttons to enter the start time for the timer event.
>
Stop
> Repeat the steps listed in the "Start" section to enter the stop time (except for timer
events for automatically switching to another station at a specific time).
31