PB-265LN
1. Throttle Position Lever
Move throttle position lever (A) to START/IDLE DETENT
(
) position.
2. Choke
Move choke (B) to COLD START (
3. Purge Bulb
Pump purge bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line.
4. Recoil Starter
Pull recoil starter handle (D) until engine fires, or maximum 5
pulls.
5. Choke
Move choke lever (B) to RUN (
necessary, restart engine.
Note: If engine does not start with choke in RUN position after 5
pulls, repeat instructions 2 - 5.
Note: Allow engine to warm up before use.
Starting Warm Engine
The starting procedure is the same as Cold Start except DO
NOT close the choke.
1. Throttle Position Lever
Move throttle position lever (A) to START/IDLE DETENT
(
) position.
X7501186200
© 10/2014 ECHO Inc.
) position.
) position, and if
OPERATION
B
D
A
C
A
17