Assembly; Install Blower Pipes / Stick Handle - Echo PB-265LN Operator's Manual

Hide thumbs Also See for PB-265LN:

Table of Contents

ASSEMBLY

Never perform maintenance or assembly procedures with engine running or serious personal injury

may result.

1. Assemble clamps (A) onto both ends of flexible pipe (B)

2. Assemble swivel pipe (C) into flexible pipe (B) and tighten

clamp (A).

3. Assemble flexible pipe (B) to elbow (D) on blower and

tighten clamp (A).

Note: A light lubricant may be used to ease assembly of flexible

pipe to blower elbow.

4. Loosen wing nut (E) completely and open stick handle

clamp.

5. Align notches (F) in handle clamp with tabs (G).

6. Slide stick handle onto swivel pipe (C). Stick handle should

be angled away from operator.

7. Position stick handle (H) for comfortable operation, and

tighten wing nut (E).

8. Assemble straight pipe (I) onto swivel pipe (C), until you feel

light resistance. Do not force connection. Hold swivel pipe

and turn straight pipe counter clockwise, engaging positive

locking channels,until connection is firm. Do not force

connention.

9. Assemble straight pipe with decal (J) to straight pipe (I) as in

step 8.

Note: Blower use will eventually loosen pipe connections.

Exclusive positive locking system allows pipes to be

tightened. If loosening occurs, remove lower straight

pipe, and install according to instructions 8 & 9.

For more information

scan this QR code.

PB-265LN

X7501186200

Table of Contents