Detail Operation; Controller Phone Number; Work Mode Exchange; Change User Password - I-Trac MT-1 User Manual

Green LED Light---GSM Status
Status
Flash
Always on

4. Important Notice:

1. This tracker have two work mode which is SMS and GPRS Mode. SMS mode is for off line
tracking by Mobile phone. GPRS
Mode is for on line tracking by computer and mobile phone .
2. Default password 0000

5. Detail Operation

1. Controller phone number

Command: * controller phone number * user password *Sequence number (1-3) **
Eg: *13900000000*0000*1-3**
Reply : SET USER NUMBER 1-3 OK
Note: 1. Tracker can have three pre-saved number
2. New Number can cover the old number
3. No pre-saved number also can control the tracker, but alarm information only to pre-saved
Number
4. SOS alarm is send to the second and third controller phone number; the other alarm alert is sent
to the first controller phone number.

2. Work Mode Exchange :

SMS Mode Command：700+ user password
Eg: 7000000
Reply: SET MODE OK, CURRENT MODE: SMS
GPRS Mode Command：710+ user password
Eg: 7100000
Reply: SET MODE OK, CURRENT MODE: GPRS

3. Change user password

Command: 777+new password +old password (4 figures)
Eg: 77712340000
Reply: SET USER PASSWORD OK
4. Request the single position
Command: 666+ user password
eg: 6660000
Reply: when the tracker receive the command, then will send the position with longitude and
latitude
5. Request location with Google map URL link
Meaning
No sim card, or searching for gsm signal
GSM Signal ok