Power Management Setup - ECS H110I-C4P User Manual

Power Management Setup

This page sets up some parameters for system power management operation.
Main Advanced
Power Management Setup
Resume By RING
Resume By PME
Resume By USB
Resume By PS2 KB
Resume By PS2 MS
Resume By RTC Alarm
EUP Function
Power LED Type
Resume By Ring (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI/PCI-E
Modem or PCI/PCI-E LAN card. You must use an ATX power supply in order to use this
feature. Use this item to do wake-up action if inserting the PCI/PCI-E card.
Resume By USB (Disabled)
This item allows you to enable or disable the USB device wakeup function from S3
mode.
Resume By PS2 KB (Disabled)
This item allows you to enable or disable the keyboard activity to awaken the
system from power saving mode.
Resume By PS2 MS (Disabled)
This item allows you to enable or disable the mouse activity to awaken the system
from power saving mode.
Resume By RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system's RTC
(realtimeclock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
EUP Function (Enabled)
This item allows user to enable or disable EUP support.
Power LED Type (Dual Color LED)
This item shows the type of the Power LED.
Press <Esc> to return to the Advanced Menu page.
H110I-C4P USER MANUAL
Chipset Tweak
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Dual Color LED
Security Boot
About Resume by
PCI/PCI-E/LAN/Ext .
USB3.1 PME

: Select Screen

/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Exit
35