Mark (Event / Waypoint) Activation - MLR FX312 User Manual

To stop the MOB function, press the Enter key when the MOB function is displayed.
Note: The plotter function (PLOT) is not available when the MOB function is active.
Advice: In practice, it is advisable to press the Mark/Mob key at least three times in order to
activate this function as this covers both configurations.
6.2. – MARK (EVENT / WAYPOINT) ACTIVATION
This function allows you to store event waypoint MARKS (or points of passage). An event
waypoint allows you to store very quickly and easily the position of an object at your current
position. This function is only available when your GPS is set to MARK AND MOB.
From any function you may press the Mark/Mob key to display a list of event waypoints. This
window is very similar to the waypoint list window. A name, an icon and a comment are
proposed, press Enter to accept them or to validate your modifications.
The proposed name is formed by the three WPT letters and three figures in numerical order e.g.
WPT001, WPT002, WPT003...
The proposed icon is a flag.
The proposed comment comprises of the time, the altitude and the date calculated by the
receiver at the time you press on the Mark/Mob key.
Tip: You can alter the Mark / Event waypoint by using MODIFY from the WAYPOINT MENU.
____________________
FX312 & FX412 VERSION 2.0 MLR ELECTRONIQUE
37