Delete The Track Or The Chart Outline - MLR FX312 User Manual

Advice : When you have displayed the chart outline, press Enter to return to the chart options
MENU. To save your work it is imperative to select option 4 – SAVE CHART OUTLINE or to
confirm when the back-up window is displayed (this window is displayed after pressing a non-
authorised key).
Advice : You can erase as many waypoints as you wish by selecting option 1 (1-DELETE LAST
POINT), this operation may be carried out as many times as necessary. The number of stored
points is automatically updated at the conclusion of this operation.
Note : To load a chart from a PC with the PMS WAYPOINTS & ROUTES software, proceed to
the following instructions : choose the NMEA183 format for the serial input, connect your
receiver to a PC using a serial port (connector DB-9, port COM1, COM2,...). Activate the
ENTER CHART OUTLINE function and start the loading from the PC. Once the waypoints are
loaded validate by pressing Enter.
5.7. – DELETE THE TRACK OR THE CHART OUTLINE
From the PLOTTER function, press the Menu key and press key 6 (or select 6-DELETE and
press Enter), then press the key 0 to delete the track or the key 1 to delete the chart outline,
and press Enter to confirm.
FX312 & FX412 VERSION 2.0 MLR ELECTRONIQUE
32