FujiFilm FinePix J20 Owner's Manual page 94

Warning Warning
FRAME NO. FULL
TOO MANY FRAMES
CAN NOT EXECUTE
A CAN NOT EXECUTE
PROTECTED FRAME
x NO IMAGE
d NO IMAGE
p CAN NOT TRIM
CAN NOT TRIM
DPOF FILE ERROR
CAN NOT SET DPOF
A CAN NOT SET DPOF
CAN NOT ROTATE
A CAN NOT ROTATE
PRESS AND HOLD THE DISP
BUTTON TO DEACTIVATE
SILENT MODE
COMMUNICATION ERROR
Downloaded From camera-usermanual.com Fujifilm Manuals
88
Description Description
The camera has run out of frame numbers
(current frame number is 999-9999).
Date for which more than 4,999 pictures exist
selected in sort-by-date view.
Red-eye reduction can not be applied to the
selected picture or movie.
An attempt was made to delete or rotate a
protected picture.
The source device selected in the playback
COPY menu contains no pictures.
An attempt was made to crop a p picture.
The picture selected for cropping is damaged
or was not created with the camera.
The DPOF print order on the current memory
card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
The picture can not be rotated.
Movies can not be rotated.
An attempt was made to choose a fl ash
mode or adjust the volume with the camera
in silent mode.
A connection error occurred while pictures
were being printed or copied to a computer
or other device.
Warning Messages and Displays
Solution Solution
Format the memory card and select RENEW for the
b FRAME NO. option in the j SETUP menu. Take
a picture to reset frame numbering to 100-0001,
then return to the b FRAME NO. menu and select
CONTINUOUS.
Choose a diff erent date.
Remove protection before deleting or rotating
pictures.
Select a diff erent source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a
new print order.
Exit silent mode before choosing a fl ash mode or
adjusting the volume.
Confi rm that the device is turned on and that the USB
cable is connected.
—
—
—
—
—