Basic Operations - Lenovo LED-3214 User Manual

31.5” (80 cm) hd led tv with dvb-t/t2/s2
Hide thumbs

Advertisement

Table of Contents
Press the POWER button on the unit or remote control to power ON the unit (indicator
-
will glow blue); press it again to power OFF (standby mode) the unit (indicator will
glow red).
Press the SOURCE button on the unit or remote control to switch the unit to DTV or ATV
-
mode.
SELECT DESIRED PROGRAM
1.
Press the CH+ button to play the next channel.
2.
Press the CH- button to play the previous channel.
3.
Press the numbered buttons on the remote control directly to select the desired program.
NOTE: Press the -/-- button repeatedly to switch the digit.
VOLUME CONTROL
-
Press VOL+ or VOL- to adjust the level of the current volume.
Available range: 0-100.
MUTE CONTROL
-
Press the MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
-
Press the SOURCE button on the unit or remote control to display the sources list.
-
Press the UP or DOWN navigation button to select the desired input source, and then press
the OK button to confirm the selection.
Available options: Satellite, DTV, ATV, AV, SCART, YPbPr, PC, HDMI 1/2/3, USB.
MULTIAUDIO SETTING
-
Press the AUDIO button on the remote control and use the navigation buttons to select the
desired audio language.
NOTE: To enable this function, make sure that the channel you are viewing supports multi-audio
languages.
INFORMATION DISPLAY
-
Press DISPLAY button on remote control to display information of current program.

BASIC OPERATIONS

18

Advertisement

Table of Contents
loading

Table of Contents