Step 5: Ddns Service Settings - wanscam JW0009 Quick Installation Manual

Step 5: DDNS Service Settings

1).Click , go to "DDNS Service Settings".
2).Choose the DDNS server , input the DDNS user and password.
3).Submit, refresh, then DDNS status will show "DDNS Succeed".
Thus the remote address is http://d0967.p2pipc.com. To make it work, you have to do port
Forwarding In your router.That is,create a virtual server; put your camera IP address and port in
(The remote address can be found on camera label.)
Step 6: Mail Service Settings and Alarm Service Settings
1). Mail service is a preparation for the alarm function. When your camera is triggered, it will send
You email attached with photo. As Premise, you should set mail service right, and test ok.
Take Gmail as example.
Note: When you use Gmail, the port should be 465, SSL should be TLS. The most important, make
5
.